OPERATIONS ON VCR DECK | EN 29 |
Basic Playback
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch to the right.
Clean the video heads using a dry cleaning cassette —●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “ON”). ( pg. 75)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
A Load a cassette.
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.
●Do not apply too much pressure when inserting.
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
●While the DVD deck is selected, the VCR deck is not selected automatically even if a cassette with its record safety tab removed is loaded.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Find the program start point.
If the tape is advanced past the start point, press REW (3). To go forward, press FF (5).
D Start playback.
Press PLAY (4).
E Stop playback.
Press STOP (8). Then press EJECT (x) on the VCR deck to remove the cassette.
Usable cassettes
T90
*Compact VHS camcorder recordings can be played on this unit. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any
**This unit can record on regular VHS and Super VHS cassettes. However, it will record regular VHS signals only.
•
●This unit is equipped with SQPB
• SQPB does not deliver Super VHS resolution.
NOTE:
When picture distortion occurs, try Manual Tracking ( pg. 33) or Video Stabilizer ( pg. 76). However, these functions might have no effect, depending on the recording condition of the tape.