EN 69

Edit To Or From

Another Video

Recorder

Player

Your unit

1

TV receiver

Audio/video cable

Audio/video

cable

 

Another recorder

Recorder

Recorder

Your unit

Audio/video cable

Audio/video cable

TV receiver

Another recorder

Player

You can use your unit as the source player or as the recording deck.

Slide the TV/VCR/DVD switch to the right.

A Make connections.

AWhen using your unit as the source player ...

... connect its AUDIO/VIDEO OUTPUT connectors to the audio/video input connectors on another recorder.

BWhen using your unit as the recording deck ...

... connect its AUDIO/VIDEO input connectors to the audio/video output connectors on another recorder.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Set the input mode of recording deck.

With this video unit, press AUX (number key “0”) and/or CH to select “F-1”.

●When using another recorder as the recording deck, refer to its instruction manual.

D Set the edit mode.

See “PICTURE CONTROL” on page 75.

E Engage the Record Pause mode of the recording deck.

Locate the point where you start recording, then engage the Record Pause mode.

F Start the source player.

Engage the Play mode of the source player.

G Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “NORM” after you finish dubbing the tapes.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 75)