EDITING (DVD DECK) | EN 71 |
Digital Audio
Dubbing
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch to the right.
Recorder
Digital audio device |
|
(MD deck etc.) |
|
Optical cable | Coaxial cable |
(not supplied) | (not supplied) |
| Note for connection: |
|
Remove the protection cap |
|
from the optical cable. | Player |
| |
1 |
|
Rear of unit |
|
DIGITAL AUDIO OUT | DIGITAL AUDIO OUT |
(OPTICAL) | (COAXIAL) |
You can dub selected audio from the unit to a digital audio device.
However, it is not possible to dub
A Make connections.
Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable.
B Prepare the unit for dubbing.
ALoad a disc or a cassette.
BPress DVD or VCR and select the audio to be dubbed. C Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then press STOP (8).
D Press REW (3) a little, then press PLAY (4) to start playback.
E Press PAUSE (9) to pause playback a little before the start point.
C Prepare the digital audio device for dubbing.AInsert an MD.
BSelect the input mode.
D Start dubbing.
APress PLAY (4) to start playback on the unit. B Start recording on the audio device.
E End dubbing.
Stop recording on the audio device. Then press STOP (8) to stop playback on the unit.
NOTES:
●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.
●You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”. ( pg. 79)
●Do not switch between the DVD deck and the VCR deck during dubbing.