86 EN |
| TROUBLESHOOTING (cont.) | |
OTHER PROBLEMS |
|
| |
|
|
|
|
| SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION |
1. | The image of TV broadcast appears | ● The unit leaves turned on and the DVD | Turn off the unit, or press VCR to select the |
| distorted on the TV screen. | deck is selected. | VCR deck, then press TV/VCR so that the |
|
|
| VCR indicator disappears from the front |
|
|
| display panel. |
|
|
|
|
2. | Whistling or howling is heard from the | ● The camcorder’s microphone is too | Position the camcorder so its microphone |
| TV during camcorder recording. | close to the TV. | is away from the TV. |
|
| ● The TV’s volume is too high. | Turn the TV’s volume down. |
|
|
|
|
3. | When scanning channels, some of | ● Those channels have been designated to | If you need the skipped channels, restore |
| them are skipped over. | be skipped. | them. ( pg. 27) |
|
|
|
|
4. | The channel cannot be changed. | ● Recording is in progress. | Press PAUSE (9) to pause the recording, |
|
|
| change channels, then press PLAY (4) to |
|
|
| resume recording. |
|
|
|
|
5. | Channel settings that were made | ● After the manual settings were made, | Perform manual setting again. |
| manually seem to have changed or | Auto Channel Set was performed. |
|
| disappeared. |
|
|
|
|
|
|
6. | Even though Auto or Semiauto Clock | ● The clock setting data received from the | Select a different host channel during |
| Set has been performed, the clock is | host channel is incorrect. | “Semiauto Clock Set” ( pg. 25), or |
| incorrect. |
| perform “Manual Clock Set” ( pg. 25). |
|
|
|
|
ATTENTION
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the cassette, operate the unit as usual.