42 EN

OPERATIONS ON DVD DECK

Basic Playback

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

ATTENTION

●You can not use the DVD deck when the VCR deck is in the Automatic Satellite Recording standby and recording mode.

●You can use the DVD deck when the VCR deck is in the timer standby mode.

To play back a MP3/JPEG disc, see pages 62 – 67.

A Load the disc.

APress OPEN/CLOSE (x) on the DVD deck to open the

disc tray.

●The unit’s power comes on automatically.

●The DVD opening screen will automatically appear approximately 5 seconds after the unit’s power has come on.

BPlace the disc in the disc tray.

CPress OPEN/CLOSE (x) on the DVD deck to close the

disc tray.

●Pressing PLAY (4) also closes the disc tray.

●While the VCR deck is selected, playback does not begin automatically even if the auto-playback DVD disc is loaded.

●“no dc” appears on the front display panel when there is no disc present on the disc tray.

B Select the DVD deck.

On the unit

Press VCR/DVD repeatedly so that the DVD indicator lights up.

On the Remote

Press DVD so that the DVD indicator lights up.

C Start playback.

Press PLAY (4).

Example: DVD VIDEO

Title number

Chapter number

Elapsed time

●You can switch the display on the front display panel between the title number/chapter number and the elapsed time by pressing DISPLAY.

●It may take a few seconds to start playback.

●If you load a DVD disc whose region code does not match the

DVD deck, “REGION CODE ERROR!” appears on the TV screen. For details, refer to “Region Number” ( pg. 7).

●With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting playback. In this case, select an item which you want to play back from the menu. Otherwise, the playback cannot go

forward. Refer to “Locating a desired scene using the menu of the Video CD with PBC” ( pg. 43) or “Locating a desired scene using the DVD menu” ( pg. 43).

D Pause playback.

Press PAUSE (9).

●To resume normal playback, press PLAY (4).

E Stop playback.

Press STOP (8). Press OPEN/CLOSE (x) on the DVD deck to open the disc tray, then remove the disc.

●Pressing PLAY (4) resume playback from the position where you stop playback. For details, see “Resume Function” on page 45.

NOTE:

When you press OPEN/CLOSE (x) while the unit is turned off, the unit’s power comes on and the disc tray opens automatically.

●For details, refer to “Placing a Disc” ( pg. 9).