28 EN

PROGRESSIVE SCAN MODE SET

Progressive Scan Mode Set

(VCR deck/DVD deck)PROGRESSIVE SCAN

This unit supports the progressive scan system (eg. 480p*) as well as the conventional interlaced scan system (eg. 480i*).

If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active on both the VCR deck and the DVD deck.

●Turn on the TV and select the VCR channel (or AV mode).

●Set the TV to the component input mode.

●Slide the TV/VCR/DVD switch to the right.

A Switch the mode.

Press and hold PROGRESSIVE SCAN on the unit for more than 3 seconds to change the scan mode between Progressive and Interlace mode, so that the Progressive mode indicator () lights up on the front display panel.

●The scan mode can also be changed by pressing DVD on the Remote. However, if DVD on the Remote is pressed when the VCR deck is selected, the DVD indicator on the unit lights up and the DVD deck is selected. In such a case, watch VHS Progressive pictures by pressing VCR/DVD on the unit to switch to the VCR deck.

●Refer also to the instruction manuals supplied with your TV.

●If your TV equipped with component video connectors does not support the progressive video input, do not change the scan mode to the “PROGRESSIVE”.

*480p and 480i indicate the number of scanning lines and scanning format of an image signal.

•480p indicates 480 scanning lines with progressive format.

•480i indicates 480 scanning lines with interlaced format.