JVC HR-XVC37U 72 EN, REMOTE, Remote Control Functions, Remote A/B/C/D Code Switching, NOTE:, NOTE:, D Display the code, C Turn off the unit, E Change the unit’s code, “2”

72 EN REMOTE

Remote Control Functions

Remote A/B/C/D Code Switching

The Remote is capable of controlling four JVC video units independently. Each of units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your unit is initially set to respond to A code signals. You can easily modify your unit to respond to B, C or D code signals.

Before performing the following steps:

Slide the TV/VCR/DVD switch to the right.

On the Remote

Keep pressing VCR down during steps A – B.

A Change the remote control code.

Press the number key “1” for A, “2” for B, “3” for C or “4” for D.

B Set the remote control code.

Press ENTER to set the code.

NOTE:

Once the batteries are removed, the remote control code is back to A.

On the unitC Turn off the unit.

Press POWER (1).

D Display the code.

Press PLAY (4) on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.

●If the code displayed on the front display panel is different from the code set on the Remote, go to step E.

E Change the unit’s code.

Press STOP (8) on the Remote. The code currently set on the Remote will be applied to the unit.

NOTE:

Even if you unplug the end of the mains power cord from the mains, the code currently set remains.