JVC KD-AV7010 manual DSP mode, Surround On DSP Off, DSP On Surround Off, Defeat Surround/DSP Off

Turning on and off the surround/	3
DSP mode

You can use surround or Digital Signal Processor (DSP) mode while playing any source.

However, when playing a multi-channel encoded disc, you cannot apply DSP mode to the playback sounds.

•When “AUTO SURROUND” is set to “ON” (initial setting when shipped from factory), an appropriate surround mode is automatically selected without any setting operation (see page 50).

•To obtain the best possible surround sounds, set the seat position and speaker size correctly (see pages 50 and 51). If only rear speakers are activated (set to “LARGE” or “SMALL”), surround/DSP mode is defeated (set to “DEFEAT”) and cannot be changed.

1

Ex. When playing DVD

2

•While playing a multi-channel encoded disc:

Surround On (DSP Off) DEFEAT (Surround Off)

• While playing a 2-channel (stereo) disc:

Surround On (DSP Off) DSP On (Surround Off)

DEFEAT

(Surround/DSP Off)

•Surround On (DSP Off)

While playing a multi-channel Dolby Digital encoded disc, “Dolby Digital” is automatically selected.

While playing a multi-channel DTS encoded disc, “DTS” is automatically selected.

While playing any other disc, “Dolby Pro Logic II” is automatically selected.

•You can select either “Dolby Pro Logic II Movie” or “Dolby Pro Logic II Music.”

•DSP On (Surround Off)

Currently selected DSP mode is activated.

•DEFEAT (Surround/DSP Off)

Both surround and DSP mode is canceled.

•You cannot go to the next step.

To be continued...

ENGLISH

37