![](/images/new-backgrounds/1221493/221493149x1.webp)
•This unit cannot play back the files which have the data such as WMA, WAVE, ATRAC3, MPEG 2.5, etc.
•The speaker/signal indicators appear in the following cases (only for DVD/CD):
–When a different type of the digital signal is detected, or
–When you start playback or resume playback from pause.
Speaker indicators | Signal indicators |
SUBWFRSUBWFR
–The speaker
–The indicator lights up when “SUBWOOFER” is set to “YES” (see page 51).
–The signal indicators changes its color from white to yellow to indicate the incoming
Changing the source
•If you change the source, playback also stops (without ejecting the disc).
Next time you select “DISC” for the playback source, disc play will start automatically.
Stopping play
•Except for MP3 discs: This unit can remember the end point (until the disc is ejected), and when you start playback again, playback begins from where it has been stopped (Resume play).
•For MP3 discs: This unit can remember the last playing track (until the disc is ejected), and when you start playback again, playback begins from the beginning of the same track.
Ejecting a disc
•If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)
Displaying the disc text information
•For MP3: If no ID3 tag is recorded, folder and track names are displayed instead.
Notes on Recordable (R) and Rewritable (RW) discs
•Use only “finalized” discs.
•For
•For
•This unit can play back
•Some discs may not play back on this unit because of their disc characteristics, and for the following causes:
–Discs are dirty or scratched.
–Discs are kept in a place where temperature becomes extremely high.
–Moisture condensation on the lens inside the unit.
–The pickup lens inside the unit is dirty.
–Discs on which the files are written with “Packet Write” method.
–There are improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.)
•Rewritable discs may require a longer readout time since the reflectance of rewritable discs is lower than that of regular DVD/CDs.
•Do not use following discs:
–Discs with stickers, labels, or protective seal stuck to the surface.
–Discs on which labels can be directly printed by an ink jet printer.
Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs.
ENGLISH
75