When DSP mode is activated, Hall | JVC KD-AV7010 specs

ENGLISH

4 Adjust the selected surround or DSP mode.

When surround mode is activated:

:Selected automatically when multi- channel DTS signal is detected (while playing a DVD or a DTS CD). No further adjustment is allowed.

:Selected automatically when multi- channel Dolby Digital signal is detected (while playing a DVD). No further adjustment is allowed.

: Select either “MOVIE” or “MUSIC.”

When you select “MUSIC,” you can adjust the following items.

• : Select “ON” to add “wraparound” sound effect with side-wall image. To cancel it, select “OFF.”

• : Adjust the center image so it may be heard only from the center speaker, only from the left/right front speakers as a “phantom” center image, or various combinations of these speakers. As the number increases, the “phantom” effect becomes stronger. (Normally select “4.”) To cancel it, select “OFF.”

When DSP mode is activated:

Ex. When selecting “HALL.”

1Select one of the DSP modes.

HALL:	Reproduces the spatial
	feeling of a large shoebox-
	shaped hall designed
	primarily for classical
	concerts.
LIVE:	Reproduces the spatial
	feeling of a live music club
	with a low ceiling.
CLUB:	Reproduces the spatial
	feeling of a rocking dance
	club.
DOME:	Reproduces the spatial
	feeling of a stadium with a
	high ceiling.

THEATER: Reproduces the spatial feeling of a theater.

2Adjust the effect level (from 1 to 5). As the number increases, the effect becomes stronger.

38

Image 38

JVC KD-AV7010 manual When DSP mode is activated, Hall

Contents

KD-AV7010 Temperature inside the car How to reset your unitFor safety Important for Laser Products How to read this manual English Contents Digital audio formats Introduction-Playable DiscsFollowing discs cannot be played back DTS ** Digital Theater Systems Quick Guide-How to Use the Controls Remote controller English Main unit front Buttons Preparation Remote Controller-RM-RK220 To erase and display the Touch Panel icons Ex. Fader/balance adjustmentOperation Methods Ex. DVD playback Using the buttons and controls directly Examples Basic Operations Adjust the volumeTurn on the power Select the source While playing any source Setting the clockWhen the unit is turned on Set the clock time Changing the touch panel color Changing the sourceChanging the graphic screen While playing a disc Displaying the level meterWhile listening to radio FM/AM Radio Operations Back to the beginning Select the Tuner Select Search ModeWhen an FM stereo broadcast is hard to receive Select a band FM/AM Tune in to a station Storing stations in memory FM station automatic presetting-SSMManual presetting Strong-station Sequential Memory To tune in to a preset station To store a station using the preset list DVD/VCD Operations DVD VCD MP3 CD/MP3 OperationsCD/CD Text Before performing any operations, observe Following Insert a discOperate the disc To resume normal speed, press Remote controller while playing a discOn-screen guide icons To play back the still picture Prohibiting disc ejection On the remote controllerChanging the aspect ratio Selecting MP3 folders Select an item, then confirm Operating the disc menuWhile playing a DVD While playing a VCD Replaying the previous scenes To cancel the PBC playbackZooming Move the zoomed-in portion on the monitor Select a subtitle language you want Selecting subtitlesSelecting audio languages Select an audio language you want Selecting multi-angle views Select a view angle you want To locate a track by displaying the track Locating a folder/track usingList List Repeat Play Displaying the disc textSelecting playback modes Intro Scan Searching for scenes or songsRandom Play Title/Chapter/Folder/Track Search Time Search Enter a number, then confirmExamples for DVD Example for VCD/CD Selecting the sources Dual Mode OperationsTo activate Dual Mode and select the subsidiary source Select the subsidiary source SUB you want To activate Dual Mode To cancel the Dual Mode, pressAdjust the AV output volume To operate the subsidiary source Make adjustment if you want to Surround Mode OperationsActivate and select the surround mode or DSP mode When surround mode is activated When DSP mode is activated Dolby Digital 5.1 CH Surround modesDolby Digital DTS Digital Surround DSP On Surround Off DSP modeSurround On DSP Off Defeat Surround/DSP Off When DSP mode is activated Hall Sound Modes iEQ Operations Available sound modes Select one of the preset sound iEQ ModesStoring your own sound modes To adjust the input level Other Sound AdjustmentsMake adjustment as you like To adjust fader and balance Adjustable items Monitor AdjustmentsSelect an item to adjust Adjust the item Select the item you want Initial Setup-DVD MenuChange the setting Subtitle Menu LanguageAudio Language Monitor Type Initial Setup-MONITOR Blind Control Wiring CheckAuto OPEN/CLOSE Beep Tone Initial Setup-ON Screen Select the item you want Change the setting Message On Screen LanguageGuide Clock Initial Setup-AUDIO MENU/PSM Change the setting or enter the setting screen Dynamic. Range Compression Auto SurroundSeat Position AMP Gain Speaker SizeCross Over FM if Filter Dimmer ModeAV2 Input Select Back Gear Other Main Functions Assigning titles to the sources Select an unwanted name Enter a name Confirm SourceStations Changing the monitor position Angle Removing the monitor CD Changer Operations Before operating your CD changer Basic CD Changer OperationsSelect CD-CH Operate the disc Selecting disc/folders/tracks Locating a disc/folder/track using the listAdvanced CD Changer Operations Select a disc you want Displaying the disc text information To locate a track by displaying the track list Repeat Play Track Searching for songs Folder/Track Search To change the aspect ratio External Component OperationsSelect the external source TV Tuner Operations Select TV TV station automatic presetting-Auto MemoryWatching TV programs Tune in to a TV station Select a preset number Tune into a TV station Displaying the preset list Check your Sirius ID, see Turn on the power Select SAT SiriusSirius Radio Operations Back to the beginning Select a category Listening to the Sirius RadioSelect SAT Sirius Select a channel for listening To select a user preset channel using the list Listening to a user preset ChannelTo store a user preset channel using the list While listening to the channel you want To store While listening to a channel To select a category Selecting a category/channel using the listsSkipping channels While listening to the 4th channel on List Sirius ID Changing the satellite setupClock Auto Adjust Time Zone Maintenance Basic Operations More about This ReceiverOperation Methods Radio Operations Ejecting a disc Changing the sourceStopping play Displaying the disc text information MP3 Control Sound Mode iEQ Operations Dual Mode OperationsSurround Mode Operations Other Sound Adjustments TV Tuner Operations Other Main FunctionsSirius Radio Operations Assigning titles to the sources Disc playback-DVD/VCD TroubleshootingFM/AM broadcast Disc playback-CD/CD-R/CD-RW TV tuner operations Initial setup-AUDIO MENU/PSMDisc playback-MP3 CD changer operations Sirius radio operations Graphic screens Preset iEQ modeAdditional Information Language Codes Code Language Specifications Main unit About mistracking Hideaway unitRequired space for the monitor ejection Removing the control panel Call Notas sobre las conexiones eléctricas Be sure to ground each unit to the car’s chassisNotas sobre la instalación de la unidad oculta Remarque sur le montage de l’appareil satellite System Connections Conexiones DEL Sistema Installation Instalación Avant de commencer Before connectingAntes de la conexión Unused La unidad sin usar De l’appareil inutilisés Main unit Unidad principal Appareil principalKV-CR100 JVC DLP DLP JVC