Changing the monitor position/
angle
You can change the monitor position and the monitor angle.
•Once you change them, they are stored. The monitor opens at the stored position and angle, next time you eject the monitor.
To change the monitor position
To operate the car switches behind the
monitor, press and hold OPEN.
The monitor change its angle to the illustrated position for about 30 seconds.
To return to its previous angle within 30 seconds, press OPEN again.
ENGLISH
On the main unit
To change the monitor angle
| MAIN SUB |
| then |
| AVOUT VOL |
On the main unit | On the remote controller |
Removing the monitor
When detaching and attaching the monitor, observe the following:
•Be careful not to drop the monitor.
•Be careful not to damage the connectors.
To detach the monitor
1
Hold
The monitor goes back into its compartment if it has been used, then comes out halfway.
2
3 Insert the blind cover to protect the internal mechanism from dust.
Each time you press the button, the monitor changes its angle step by step.
•By holding the button
To attach the monitor
Insert the monitor into the compartment with the screen facing down.
55
