RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

To stop searching before a station is

received, press the same button you have pressed for searching.

Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as

follows:

FM1 FM2 FM3 AM

Note:

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Start searching for a station.

To search for stations of higher frequencies

To search for stations of lower frequencies

until “M” (manual) starts flashing on the display.

When a station is received, searching stops.

10