JVC kd-sc601 Assigning names to the source, —EXTIN, ENGLISH, —AMPGAIN, —TAGDISP, To turn the tag display on or off, To select the amplifier gain control

ENGLISH

To select the external component to use

—EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component—to use.

When shipped from the factory, CD changer is selected as the external component.

•	CHANGER: To use the CD changer.
•	LINE IN: To use the external component
	other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

To select the amplifier gain control—AMP GAIN

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “LOW PWR” to prevent them from being damaged.

When shipped from the factory, “HIGH PWR” is selected.

•LOW PWR: You can adjust the volume level from “VOL 00” to “VOL 30.”

Note:

If you change the setting from “HIGH PWR” to “LOW PWR” while listening at a volume level more than 30, the unit automatically changes the volume level to “VOL 30.”

•HIGH PWR:You can adjust the volume level from “VOL 00” to “VOL 50.”

To turn the tag display on or off—TAG DISP

An MP3/WMA file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version

1)and ID3v2 (ID3 Tag version 2). If both ID3v1 and ID3v2 are recorded on a disc, ID3v2 information will be shown.

When shipped from the factory, “TAG ON” is selected.

•TAG ON: Turns on the ID3 tag display while playing MP3/WMA files.

•If an MP3/WMA file does not have ID3 tags, folder name and file name appear.

•TAG OFF: Turns off the ID3 tag display while playing MP3/WMA files. (Only the folder name and file name can be shown.)

Assigning names to the source

You can assign names to CDs (both in this unit and in the CD changer).

After assigning a name, it will appears on the display when you select the source.

Source	Maximum number of characters
CDs*	Up to 32 characters (up to 40
	discs)

*You cannot assign a name to a CD Text or an MP3/ WMA disc.

1 Select a source you want to assign a name to.

CD CD-CH

When you select a source, the power

automatically comes on.

34