2 While pressing DISP (display), press and hold SEL (select) for more than 2 seconds.
Notes:
•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
ENGLISH
Ex.: When you select CD as the source
3 Select a character.
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
|
|
|
|
|
|
|
|
|
|
U | V | W | X | Y | Z | 0 | 1 | 2 | 3 |
4 | 5 | 6 | 7 | 8 | 9 | – | / | < | > |
|
|
|
|
|
|
|
|
|
|
space
You can change the standard plate with another plate supplied with your unit.
You can also download them by visiting <http://www.jvc.co.jp/jvccar>.
•When changing the plate, be careful not to leave your fingerprints on the plate or cover.
1 Loosen the screws with the supplied hex screwdriver.
4 Move the cursor to the next (or previous) character position.
2 Remove the plate cover and the standard plate.
|
| Standard plate |
5 | Repeat steps 3 and 4 until you |
|
| finish entering the name. |
|
6 | Finish the procedure while the last |
|
| selected character is flashing. | Plate cover |
To erase all the characters at a time, press and |
|
hold DISP (display) for more than 1 second as |
|
described in the procedure above. | CONTINUED ON THE NEXT PAGE |
35