ENGLISH

Manual preset

Ex.: Storing FM station of 92.5 MHz into the

 

You can preset up to 6 stations in each band

 

(FM1, FM2, FM3, and AM) manually.

 

preset number 1 of the FM1 band.

 

1 Select the band (FM1 – 3, AM) you

 

want to store stations into (in this

 

example, FM1).

 

Each time you press the

 

button, the band changes as

 

follows:

 

FM1 FM2 FM3 AM

 

2 Tune in to a station (in this example,

 

of 92.5 MHz).

 

To tune in to stations of

 

higher frequencies

 

To tune in to stations of lower frequencies

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

Preset number flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 11 and 12.

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM1 FM2 FM3 AM

2 Select the number (1 – 6) for the preset station you want.

12