ENGLISH
3 Replace with another plate (a standard, cutout, or downloaded plate) of your preference.
• When attaching a standard plate
Standard plate
Notes:
•Be sure to keep the hex screwdriver for future use.
•Two spare screws for the plate cover attachment are provided with the unit. See the Installation/ Connection Manual (separate volume).
•When you attach the plate cover, do not tighten the screws too hard; otherwise, the plate cover might be cracked.
Plate cover
•When attaching a cutout or downloaded plate
Add the transparent plate (supplied) between the cutout or downloaded plate and the plate cover in order to attach the plate cover in place.
Cutout or downloaded plate 
Plate cover
Transparent plate (supplied)
When attaching the plate cover
Openings
Protruding parts
Ensure the two protruding parts at the bottom of the plate cover are inserted into the two openings on the control panel, as illustrated.
1Unfold the supplied cutout plates.
2Cut the plates out using a scissors.
3Trim out the window and two knobs using a knife on a rubber mat.
36