JVC KY-F550E instruction manual E-26, Use the 5/∞ buttons to select “LEVEL”, then press the SET

3. 4.

Computer Monitor

Use the [5/∞] buttons to select “EXPOSURE..”, then press the [SET] button.

Band

Press the [MENU] button for 1-2 seconds. The “MENU” screen will be displayed.

1.

2.

3. Use the [5/∞] buttons to select “SHUTTER”, then press the [SET] button.

The set value starts blinking and adjustment is possible.

4. Various Modes of Shooting

Shooting the Computer Monitor

When shooting images of computer monitors or displays, horizontal bands will appear on the screen. To eliminate the bands, it will be necessary to align the shutter speed with the scanning frequency of the monitor.

Make sure that the Switch 4 located at the side of this unit is set to [OFF] (lower side).

		4. Use the [5/∞] buttons to set value to “V. SCAN”, then press
- - - EXPOSURE - - -		the [SET] button.
I R I S MODE	AUTO
		5. Use the [5/∞] buttons to select “LEVEL”, then press the [SET]
MANUA L L EVE L	- - - - - -
GA I N	ST EP
LEVE L	0 d B	button.
SHUTTER	ST EP	6. Use the [5/∞] buttons to adjust the shutter speed. Pay atten-
LEVE L	NORMAL
ADVANCED EXPOSURE . .
PAGE BACK		tion to the screen,
		If black bands are visible : use the [∞] button to lower the
		shutter speed
“EXPOSURE” Screen
		If white bands are visible : use the [5] button to increase the
		shutter speed
5. 6.		7. When bands are decreased to the minimum, press the [SET]
		button. This will be recorded in the memory of the unit.
- - - EXPOSURE - - -
		8. Press the [MENU] button for 1-2 seconds.
I R I S MODE	AUTO
MANUA L L EVEL	- - - - - -
		The normal screen will be displayed.
GA I N	STEP
LEVE L	0 d B
SHUTTER	V. SCAN
LEVE L	1 / 5 0 s
ADVANCED EXPOSURE . .
PAGE BACK

Note

Vertical scanning frequency may vary with computer types and there are cases when bands may not be fully eliminated. In addition, frequency may also differ depending on the software used.

E-26