JVC KY-F550E instruction manual Others continued, Connecting the IEEE 1394 Cable, E-48

6. Others (continued)

Connecting the IEEE 1394 Cable

	● Attach the supplied clamp filter as shown in the
	diagram on the left to reduce unwanted electro-
	magnetic emission.
	● Attach the clamp filter as shown in the diagram
	on the left to this unit as near as possible.
Wind Once	● Set Switch 1 and Switch 4 located at the side of
	this unit to [ON] (upper side).

	1	2	3	4
	ON
	OFF
To [DV] Terminal	Switch 1				Switch 4

Caution

Perform these when the unit is off.

Connecting the analogue output (D-SUB) Cable

To [RGB, Y/C, SYNC

OUT] Terminal

● Attach the supplied clamp filter as shown in the diagram on the left to reduce unwanted electro-

magnetic emission.

● Attach the clamp filter as shown in the diagram on the left to this unit as near as possible.

● Set the switches located at the side of this unit.

• Setting Switch 2

Set this switch to [ON] (upper side) for Y/C output.

Set this switch to [OFF] (lower side) for RGB output.

• Setting Switch 3

Set this switch to [ON] (upper side) if sync signal is to be superimposed onto the Green (G) channel of the video signal.

☞ Page 10 ‘9 Function Setting Switch’

1	2	3	4
ON
OFF
Switch 2				Switch 3

Caution

Perform these when the unit is off.

E-48