EN 13
Results of Auto Set Up/Preset Download appear on the front display panel
If both Auto Channel Set and Auto
Clock Set have been performed successfully, the correct current time
is displayed.
Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR button(s).
●If station names (ID – pg. 72) have also been stored in the unit’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 69 – 72.
If Auto Channel Set has succeeded but Auto Clock Set has not, “CH 1” (channel position) is displayed.
ATurn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR button(s).
●If station names (ID – pg. 72) have also been stored in the unit’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 69 – 72.
BPerform “Clock Set” on page 74.
If both Auto Channel Set and Auto Clock Set have failed, “–
Make sure the cables are connected properly and turn off the unit’s power once, then turn the unit’s power back on again. The Country Set display appears on the TV screen; perform “Auto Set Up” on page 10 or “Preset Download” on page 12 again.
IMPORTANT
●To check if the Guide Program numbers have been set
correctly, perform the SHOWVIEW Timer Programming. ( pg. 24) (VHS deck only)
●In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you
SHOWVIEW system, be sure to check the desired channel is selected correctly. ( pg. 24, “SHOWVIEW® Timer Programming”) (VHS deck only)
●Your unit memorizes all detected stations even if reception of
some of them is poor. You can delete those stations with an unacceptable picture. ( pg. 70, “Delete A Channel”)
INFORMATION
Language for the on-screen display (VHS deck)
Auto Set Up also selects the language automatically for the on- screen display depending on the Country setting you have made in step B on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.
SUOMI | ]SUOMI | ITALIA | ]ITALIANO |
PORTUGAL | ]ENGLISH | MAGYARORSZÁG ]MAGYAR | |
DEUTSCHLAND | ]DEUTSCH | ESPAÑA | ]CASTELLANO |
POLSKA | ]POLSKI | NEDERLAND | ]NEDERLANDS |
NORGE | ]NORSK | GREECE | ]ENGLISH |
SVERIGE | ]SVENSKA | OTHER WESTERN ]ENGLISH | |
DANMARK | ]DANSK | EUROPE |
|
ÖSTERREICH | ]DEUTSCH | OTHER EASTERN | ]ENGLISH |
CESKÁ | ]CEcTINA | EUROPE |
|
REPUBLIKA |
|
|
|
If you want to change the language setting manually, see “On- screen Language Set (VHS deck)” on page 15.
Language for the
Set manually the
Just Clock
Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”. ( pg. 75, “Just Clock”)
T-V Link Functions
When you connect the unit to your TV via a
For details, refer to the instruction manual of your TV.
*Compatible with TVs offering
TV Auto Power On
The TV will turn on and be set to its AV mode automatically whenever you play a tape.
For details, refer to the instruction manual of your TV.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit. For details, refer to the instruction manual of your TV.
Direct Rec (VHS deck only)
You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to “ON”. ( pg. 63)
