JVC LPT0970-001A, 0504CSH-ID-VT manual 54 EN

54 EN EDITING (VHS DECK)

Edit From A Camcorder

You can use a camcorder as the source player and your unit as the recording deck.

Slide the TV/VCR/DVD switch to the right.

Recorder

	To PAUSE
AUDIO input	connector
Audio cable (not provided)
	Mini-plug cable
Video cable (not provided)	(not provided)
	(JVC camcorder
VIDEO input	only)

VIDEO OUT

AUDIO OUT

Player EDIT

A Make connections.

Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Set the unit’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1”.

D Set the edit mode.

See “PICTURE CONTROL” on page 63.

E Engage the Record Pause mode.

Use 4, 3, or 5 to locate the point where you start recording, then press and hold 9 and press 7 to engage the Record Pause mode.

F Start the camcorder.

Engage the Play mode of the camcorder.

G Start the unit.

Press 4 to engage the Record mode of the unit.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.