JVC 0504CSH-ID-VT Place a disc and load an MD, Prepare the audio device for dubbing, Insert an MD

EDITING (DVD DECK) EN 57

Digital Audio Dubbing

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Recorder

Digital audio device (MD deck etc.)

Optical cable (not provided)

DIGITAL AUDIO OUT

Player

Note for connection:

Remove the connector cover from the unit and remove the protection cap from the cable.

You can dub selected audio from the DVD or Audio CD disc to an MD etc.

However, it is not possible to dub copy-protected discs.

Example: Dubbing to an MD

A Make connections.

Connect the optical cable between the unit and the digital audio device.

B Place a disc and load an MD.

For the DVD deck

APress x on the DVD deck to open the disc tray. B Place the disc in the disc tray.

C Press x on the DVD deck to close the disc tray.

For the digital audio device

Insert an MD.

C Prepare the DVD deck for dubbing.

APress DVD and select the audio to be dubbed.

BSearch for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

CPress 3 a little, then press 4 to start playback. D Press 9 to pause playback a little before the start

point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

APress 4 to start playback on the DVD deck. B Start recording on the audio device.

F End dubbing.

Stop recording on the audio device. Then press 8 to stop playback on the DVD deck.

NOTES:

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●You can also dub audio from a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”. ( pg. 66)