JVC 0504CSH-ID-VT, LPT0970-001A manual Others Settings, Playback discs, Digital, Audio CD/Video CD

				EN 67
Playback discs			Output
	STREAM/PCM		DOLBY DIGITAL/PCM	PCM ONLY
DVD VIDEO with
48 kHz, 16/20/24 bit linear			48 kHz, 16 bit linear PCM
PCM
DVD VIDEO with DTS	DTS bitstream		44.1 kHz, 16 bit stereo linear PCM
DVD VIDEO with Dolby	Dolby Digital bitstream			48 kHz, 16 bit stereo linear
Digital				PCM
Audio CD/Video CD		44.1 kHz, 16 bit stereo linear PCM
Audio CD with DTS	DTS bitstream		44.1 kHz, 16 bit stereo linear PCM
MP3 disc			Linear PCM

NOTES:

●The unit is not equipped with the DTS decoding function.

●When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.

●If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

Others Settings

8RESUME — ON / OFF / DISC RESUME

When this function is set to “ON”, you can use the resume function. ( pg. 32)

ON: You can start playback from the resume point of the placed disc.

OFF: You cannot use the resume function.

DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.

NOTE:

This function is not available for Audio CDs and MP3 discs.

8ON SCREEN GUIDE — ON / OFF

When this function is set to “ON”, the unit can display “on- screen guide” icons or characters which show the conditions of the unit or disc.