JVC LPT0970-001A, 0504CSH-ID-VT manual 24 EN, Showview Timer Programming

24 EN OPERATIONS ON VHS DECK (cont.)

SHOWVIEW® Timer

Programming

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize.

Before performing the SHOWVIEW Timer

Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the SHOWVIEW screen.

Press PROG.

C Enter the SHOWVIEW number.

Press the number keys to enter the SHOWVIEW number of a programme you wish to record.

●If you make a mistake, press &

and input the correct number.

SHOWVIEW SYSTEM

D Access the SHOWVIEW Program screen.

Press OK, then the

SHOWVIEW Program screen appears (if you’re just starting out, “P1” appears).

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, or “TV PROG” shows “– –”, press PR +/– to input the channel position number on which your unit receives the station, then press OK or e.

●If the number you entered is invalid, “ERROR” appears on the TV screen. Press & and input a valid SHOWVIEW number.

E Set the tape speed.

Press p.

F Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is set to “ON”.

●If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”

is set to “OFF”.

 “VPS/PDC Recording” on page 25.

SHOWVIEW SYSTEM