JVC 0504CSH-ID-VT, LPT0970-001A Set the input mode of recording deck, Start the source player

EN 55

Edit To Or From Another Video Recorder

You can use your unit as the source player or as the recording deck.

A When using your unit as the source player:
TV	Player	Your unit
	AV mode
	21-pin SCART cable
	(not provided)
	Another recorder
	Recorder
B When using your unit as the recording deck:
TV	Recorder	Your unit
	AV mode
	21-pin SCART cable
	(not provided)
	Another recorder

Player

Slide the TV/VCR/DVD switch to the right.

A Make connections.

Connect the player’s 21-pin SCART connector to the unit’s 21-pin SCART connector as illustrated.

AWhen using your unit as the source player:

— connect its L-1 IN/OUT connector to the recording

deck.

BWhen using your unit as the recording deck:

— connect its L-1 IN/OUT or L-2 IN/DECODER connector to the source player.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Set the input mode of recording deck.

With this unit, press AUX (number key “0”) and/or PR to select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the L-2 IN/DECODER connector, set “L-2 SELECT” to “A/V”. ( pg. 64)

D Set the edit mode.

See “PICTURE CONTROL” on page 63.

E Engage the Record Pause mode of the recording deck.

Locate the point where you start recording, then engage the Record Pause mode.

F Start the source player.

Engage the Play mode of the source player.

G Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this unit as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting. ( pg. 63)