JVC 0504CSH-ID-VT, LPT0970-001A manual Disengage the timer mode, Access the Programme Check screen

EN 27

To Timer-Record Weekly Or Daily Serials:

—anytime during steps D through I, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

NOTES:

●You can programme this unit to timer-record as many as 8 programmes. If you try to programme the unit to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes. ( “To cancel or change a programme”)

●If there is a conflict in the timer schedule and one programme overlaps with another, the programme starting earlier or programme with the lower programme number will be recorded.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

ASet “L-2 SELECT” to “A/V”. ( pg. 64)

BPerform steps A – K. Enter “L-2” for the channel position in step G.

CSet the satellite receiver to the appropriate channel before the selected programme begins.

DLeave the satellite receiver’s power on.

Check, cancel and change programmes

A Disengage the timer mode.

Press #, then press 1.

B Access the Programme Check screen.

Press ".

C Access the Programme screen.

Press " again to check more information. Each time you press ", the next programme’s information appears.

To cancel or change a programme

D Cancel or change a programme.

Press & to cancel a programme. To change programme settings, press the appropriate button: START +/–, STOP +/–, DATE +/–, PR +/–, VPS/PDC (number key “7”), DAILY (number key “8”), WEEKLY (number key “9”) and/or p.

E Return to the normal screen.

Press " as many times as necessary. If there are still some programmes remaining, go on to step F.

F Return to the timer mode.

Press #.

NOTE:

You can also check the programmes on the front display panel even if the unit’s power is off (unless the unit is in the Power Save mode  pg. 64) or the unit is in the Timer mode; however, it is not possible to cancel or change the programmes.