JVC LPT0970-001A, 0504CSH-ID-VT 60 EN, Connecting To a Satellite Receiver, Simple Connections

60 EN SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Simple Connections

This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector.

Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector.

Outdoor unit	Aerial
Satellite cable	TV aerial cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

TV

Perfect Connections

This is an example of recommended connections if your TV has two 21-pin AV input (SCART) connectors. Connect the decoder to the satellite receiver’s connector if you have a decoder, L-1 IN/OUT connector to TV’s connector, and L-2 IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

Outdoor unit	Aerial
Satellite cable	TV aerial cable
Satellite receiver
	ANTENNA IN
	ANTENNA OUT

Decoder

TV

IMPORTANT

When you set “L-2 SELECT” to “SAT” ( pg. 64), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the front display panel.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the unit to the video mode.

NOTES:

●Set “L-2 SELECT” to “A/V”. ( pg. 64)

●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel. (VHS deck only)

●For details, refer to the instruction manual of the satellite receiver.

NOTES:

●Set “L-2 SELECT” to “A/V”. ( pg. 64)

●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel. (VHS deck only)

●To receive a scrambled broadcast, descramble the signal with the decoder connected to the satellite receiver.

●For details, refer to the instruction manual of the satellite receiver and decoder.