JVC LPT0970-001A 20 EN, Instant ReView, Repeat Playback, Manual Tracking, Soundtrack Selection

20 EN OPERATIONS ON VHS DECK (cont.)

Instant ReView

Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the unit is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●To watch the first of the 3 programmes, press three times. The unit searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

Repeat Playback

Your unit can automatically play back the whole tape 100 times repeatedly.

1Start playback.

Press 4.

2Activate Repeat Playback.

Press 4 and hold for over 5 seconds, then release.

●The Play indicator ($) on the front display panel blinks slowly.

●After playing back a tape 100 times, the unit stops automatically.

3Stop Repeat Playback.

Press 8 at any time.

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1 Override automatic tracking.

During playback, press p on the remote control.

2Adjust the tracking manually.

Press PR + or – on the remote control.

●Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing A.MONITOR changes the soundtrack as follows:

TRACK	USE
On-Screen Display
HI FI	For Hi-Fi stereo tapes
L j h R
HI FI	For main audio of Bilingual tapes
L j
HI FI	For sub audio of Bilingual tapes
h R
NORM	For audio-dubbed tapes
HI FI	For audio-dubbed tapes
NORM

NOTES:

●“HIFI L j h R” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 23.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear. ( pg. 63)

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.