Extron electronic MAV 84, MAV 88, MAV 44, MAV 48 manual Front panel security lockout Executive mode

Front panel security lockout (Executive mode)

The MAV Series switchers have a front panel security lockout (Executive mode) feature that limits the operation of the switcher from the front panel and optional IR remote control. When the switcher is locked, the Enter button, I/O button (video only, audio/video, and audio only selection), and all of the front panel audio gain and attenuation functions are disabled. The front panel input and output buttons continue to allow ties to be viewed, but ties cannot be created.

The front panel security lockout also disables the IR remote sensor to lock out remote control functions.

Toggle the front panel lockout on and off by pressing and holding the Enter and Preset buttons for approximately 2 seconds (figure 3-41).

Press and hold the

Enter and Preset buttons.

ENTER PRESET PRESET

2 seconds

The Preset LED flashes twice to indicate that the front panel lockout has toggled on or off.

Release the Enter and Preset buttons.

Figure 3-41 — Toggle front panel lockout on or off

Clearing all ties and presets

To clear all ties and saved presets, press and hold the Preset button on the front panel while applying AC power (figure 3-42). Continue to hold the Preset button until all LEDs light and then release the Preset button. The power up sequence completes:

•All LEDs turn off then turn on and off from left to right.

•The Video and Audio LEDs turn on (audio/video models only).

• All other LEDs remain off.

Press and hold the Preset button while you apply power to the switcher.

PRESET

The switcher lights all of the LEDs.

11

Power

PRESETI/O

VID +dB

AUD -dB

AUDIO SETUP

Release the Preset button.

PRESET

The switcher continues the power up process.

Figure 3-42 — Clear all ties and presets

MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation 3-25