
Remote Operation, cont’d
4. | Start the Matrix Switchers Control Program and connect to the MAV switcher. |
| See “Using the software”, steps 1 through 3, starting on page |
5. | Click on Tools > Update firmware. |
| If your switcher has version 2.xx firmware files, the Extron Firmware Loader |
| appears (figure |
If your switcher has version 1.xx firmware files, an open file window appears (figure
Figure 4-12 — Open window, version 2.xx firmware files
6a. Click Upload. The Firmware Update window appears.
6b. Click OK. The open file window appears. Proceed to step 7.
7. Navigate to the folder where you saved the firmware upgrade file. Select the file.
Ensure that the firmware upgrade is for the MAV Series AV switcher.
Valid version 1.xx firmware files must have the file extension “.HEX”. Any other file extension is not a firmware upgrade for your switcher.
Valid version 2.xx firmware files must have the file extension “.s19”. Any other file extension is not a firmware upgrade for your switcher.
8. Click the Open button.
If your switcher has version 2.xx firmware files, the Extron Firmware Loader reappears (figure
If your switcher has version 1.xx firmware files, proceed to step 11.