Extron electronic MAV 44, MAV 48, MAV 84, MAV 88 Using the software

4-13MAV 44 / 48 / 84 / 88 Matrix Switchers • Remote Operation
4. Follow the on-screen instructions. By default, the Windows installation of the
Matrix Switchers Control Program creates a C:\Program Files\Extron\
Matrix_Switcher directory, and it places three icons into a group folder named
“Extron Electronics\Matrix Switchers.” The three installed icons are:
• MATRIX Switcher+ Control Program
• MATRIX Switcher+ Help
• Uninstall MATRIX Switcher
Using the software
Overview
1. To run the Matrix Switchers Control Program, double-
click on the Matrix Switcher+ Control Program icon
(shown at right) in the Extron Electronics group or folder.
The Comm Port Selection window (figure 4-8) appears.
Figure 4-8 — Comm port selection window
2. Choose either the comm port that is connected to the MAV switcher’s RS-232
port, or Emulate.
Although IP [LAN] is available for selection, the switcher does not have an
Ethernet port. Do not select IP [LAN].
a.If you selected a comm port, check that the baud rate
displayed in the comm port selection window is the
switcher’s rate of 9600. If you need to change the
baud rate, click on the Baud button and double-click
on 9600.
Click OK and proceed to step 3.
b.If you selected Emulate, click OK and see “Using emulation mode” on
page 4-22.