Extron electronic MAV 84, MAV 88 manual Example 2 Add a video tie to a set of video and audio ties

The current configuration (figure 3-8) is now:

•Input 5 video and audio tied to output 3, output 4, and output 8

Input 5 (video/audio) tied

to outputs 3, 4, and 8.

Input

5

3

4 Output

8 Video Audio

Figure 3-8 — Example 1, final configuration

Example 2: Add a video tie to a set of video and audio ties

The following steps show an example in which a new video tie is added to the current configuration. The example shows the front panel indications that result from your actions.

This example assumes that you have performed example 1.

1. Audio/video switchers only — Select video only for the tie (figure 3-9).

Press the button to cycle through the selections.

I/O

The video LED lights when video is selected. VID

The audio LED is off when audio is deselected. AUD

Figure 3-9 — Select video only

2. Press and release the Input 5 button (figure 3-10).

Press and release the Input 5 button.

4	INPUTS			2		4	OUTPUTS
	5	6	1		3		5	6	7	8

The Input 5 LED lights to indicate that input 5 is selected.

The Output 3, Output 4, and Output 8 LEDs light to indicate the ties created in example 1.

Figure 3-10 — Select an input

MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation 3-9