JVC LVT1112-001A Connecting video components, Digital connection, DVD Player, STB Set Top Box

Getting started

Connecting video components

Turn off all components before making connections.

•Illustrations of the input/output terminals are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among different components.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

Digital connection

Digital optical cord (not supplied)

DIGITAL 1

(VR)

		DIGITAL 3 DIGITAL 2				DIGITAL IN
		(DVD)	(STB)
								Digital coaxial cord
								(supplied: 1 cable)
VR	AV IN /OUT	TV			DIGITAL 1	CENTER	SURROUND	FRONT
					(VR)	SPEAKER	SPEAKERS	SPEAKERS
							RIGHT LEFT RIGHT LEFT
		DIGITAL 3	DIGITAL 2	DIGITAL IN
		(DVD)	(STB)
DVD	AV IN	STB			CAUTION:
					SPEAKER
			SUBWOOFER		IMPEDANCE
			OUT		8 ~ 16

Before connecting an optical digital cord, unplug the protective plug.

DVD Player

OPTICAL

DIGITAL OUT

STB (Set Top Box)

COAXIAL

DIGITAL OUT

VR (VDR)

NOTES

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (VR) (coaxial): For VR (VDR)

–DIGITAL 2 (STB) (optical): For STB (Set Top Box)

–DIGITAL 3 (DVD) (optical): For DVD player

If you connect other components, change the digital input (DIGITAL IN) terminal setting correctly. See “Setting the digital input (DIGITAL IN) terminals—DIGITAL IN” on page 19.

•Select the correct digital input mode.

See “Selecting the analogue or digital input mode” on page 11.

7