Speaker settings
When selecting “MEDIUM ROOM,”
•Center speaker delay time is set to 1 msec.
•Surround speakers delay time is set to 2 msec.
When selecting “LARGE ROOM,”
•Center speaker delay time is set to 0 msec.
•Surround speakers delay time is set to 0 msec.
LS
L
LS
L
C
C
R
2.7 m
2.4m
2.1m
RS
R
3.0 m
RS
3Turn MULTI JOG to select the appropriate setting for the item selected in step 2, then press SET.
Your setting is stored.
ANALOG L |
| R | |
|
|
|
|
VOL
Ex.: When selecting “NO” for “SUBWFR.”
4If you would like to set other items, repeat steps 2 and 3.
Setting the subwoofer information
— SUBWFR (subwoofer)
Register whether you have connected a subwoofer or not.
YES*: Select when you have connected a subwoofer. The subwoofer speaker indicator (SUBWFR) lights up on the display (see page 14). You can adjust the subwoofer output level (see page 21).
Setting the speakers and subwoofer information
You can set the following speakers and subwoofer information manually as you prefer. When you change your speakers, register the information again.
•Subwoofer
•Speaker
•Speaker delay
•Crossover
•Low frequency effect
•Dynamic range
Operating procedure
|
|
|
|
|
|
|
|
|
|
| SOURCE SELECTOR | MASTER VOLUME |
| TV DIRECT | SETTING | ADJUST | SURROUND |
|
|
|
|
| SET / TUNER PRESET | / MULTI JOG |
|
|
|
|
|
|
|
| PHONES | |||||
STANDBY / ON | STANDBY |
|
|
| DVD MULTI | DVD | STB | VR | TV | FM / AM |
|
|
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press SETTING.
MULTI JOG now works for the setting operation.
2Turn MULTI JOG until the setting item you want to set appears on the display, then press SET.
•As you turn MULTI JOG, the indication changes as follows:
ANALOG L |
| R | |
|
|
|
|
SUBWFR
VOL |
SUBWFR |
|
|
|
|
|
| FRNT SP |
|
|
|
|
|
|
| CNTR SP | |||
|
|
|
|
|
|
|
| |||||||||||
SURR SP |
|
|
|
| CNTR DL |
|
|
|
|
|
| SURR DL | ||||||
|
|
|
|
|
|
| ||||||||||||
CROSS |
|
|
| LFE |
|
|
|
|
| D.COMP | ||||||||
|
|
|
|
|
| |||||||||||||
DIGITAL IN |
| AUTO SR |
|
|
|
| MODE | |||||||||||
|
|
|
|
| ||||||||||||||
QUICK SETUP |
|
| (Back to the beginning) | |||||||||||||||
|
|
NO:Select when you have not connected or have disconnected a subwoofer.
*Initial setting
Setting the speakers size
—FRNT SP (front speakers), CNTR SP (center speaker), SURR SP (surround speakers)
Register the sizes of all the connected speakers.
LRG (large): Select when the cone speaker size is larger than 12 cm.
SML (small)*: Select when the cone speaker size is smaller than 12 cm.
NO:Select when you have not connected a speaker. (Not selectable for the front speakers.)
*Initial setting
NOTES
•If you have selected “SML (small)” for the front speaker size, you cannot select “LRG (large)” for the center and surround speaker sizes.
•If you have selected “NO” for the subwoofer setting (see above and page 16), you can only select “LRG (large)” for the front speaker size.
CONTINUED ON THE NEXT PAGE
17