Using the DVD MULTI playback mode
This receiver provides the DVD MULTI playback mode for reproducing the analogue discrete output mode (5.1 channel reproduction) of the DVD player.
In addition, the DVD MULTI playback mode can be used for reproducing a DVD Audio sound.
Before playing back a DVD, refer also to the manual supplied with the DVD player.
•When using the DVD MULTI playback mode, connect the DVD player with its analogue discrete output jacks to the DVD IN jacks on the rear panel (see page 10).
When operating this receiver using the remote | DVD |
|
| ||
control, always set the mode selector to |
| |
AUDIO/TV |
| |
AUDIO/TV/VCR/STB. | /VCR/STB |
|
|
| |
|
|
|
On the front panel:
|
|
|
|
|
|
|
|
|
|
| SOURCE SELECTOR | MASTER VOLUME |
| TV DIRECT | SETTING | ADJUST | SURROUND |
|
|
|
|
| SET / TUNER PRESET | / MULTI JOG |
|
|
|
|
|
|
|
|
|
|
|
|
| PHONES |
STANDBY / ON | STANDBY |
|
|
| DVD MULTI | DVD | STB | VR | TV | FM / AM |
|
|
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press ADJUST.
MULTI JOG now works for the sound adjustment.
Activating the DVD MULTI playback mode
On the front panel:
|
|
|
|
|
|
|
|
|
|
| SOURCE SELECTOR | MASTER VOLUME |
| TV DIRECT | SETTING | ADJUST | SURROUND |
|
|
|
|
| SET / TUNER PRESET | / MULTI JOG |
|
|
|
|
|
|
|
| PHONES | |||||
STANDBY / ON | STANDBY |
|
|
| DVD MULTI | DVD | STB | VR | TV | FM / AM |
|
|
1Turn SOURCE SELECTOR until “DVD MULTI” appears on the display.
The DVD MULTI indicator lights in red.
2Select the analogue discrete output mode on the DVD player, and start playing a DVD.
From the remote control:
1 Press DVD MULTI. | TV DIRECT |
|
| AUDIO |
DVD | VCR | STB | TV | |
The DVD MULTI indicator lights in red. | DVD | VR | STB | TV |
2 Select the analogue discrete | DVD MULTI FM/AM | TV/VIDEO MUTING | ||
TV VOL | CHANNEL | VOLUME | ||
output mode on the DVD player, |
|
|
| DVD |
|
|
| /VCR/STB | |
and start playing a DVD. |
|
|
| AUDIO/TV |
TUNING | FM MODE | TUNING | ||
Adjusting the speaker output level
You can adjust the speaker output level while playing a DVD using the analogue discrete output mode on the DVD player.
Once you have adjusted the sound, the adjustment is memorized.
•The test tone does not output through the speakers to adjust the speakers output levels when selecting DVD MULTI.
From the remote control:
It will be convenient for you to use the remote control for the sound adjustments, since you can make adjustments from your listening point.
2Turn MULTI JOG until the setting item you want to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follows:
ANALOG | L | C | R |
|
| SUBWFR LFE |
| ||
| LS |
| RS | VOL |
BASS |
|
| TREBLE |
|
|
| SUBWFR |
|
|
| ||||||
|
|
|
|
| ||||||||||||
CENTER |
|
| SURR L |
|
|
| SURR R |
|
|
| ||||||
|
|
|
|
|
| |||||||||||
EFFECT |
|
|
| PANORAMA |
|
|
| BAL |
|
| ||||||
|
|
|
|
| ||||||||||||
B.BOOST |
|
| ATT |
|
| (Back to the beginning) | ||||||||||
|
|
| ||||||||||||||
CENTER*: To adjust the center speaker output level (from
SURR L*: To adjust the left surround speaker output level (from
SURR R*: To adjust the right surround speaker output level (from
* “0 (dB)” is the initial setting.
3Turn MULTI JOG to adjust the item selected in step 2, then press SET.
Your setting is stored.
•Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.
ANALOG | L | C | R |
|
| SUBWFR LFE |
| ||
| LS |
| RS | VOL |
Ex.: When selecting “+8 (dB)” for “CENTER.”
4Repeat steps 2 and 3 to adjust the other settings.
Adjust the following speaker output levels (from
•Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.
To adjust the center speaker level,
press CENTER
To adjust the left surround speaker level,
press SURR L
To adjust the right surround speaker level,
press SURR R
AUDIO | SUBTITLE TITLE/GROUP RETURN | ||
ZOOM |
| BASS | TREBLE |
| 1 | 2 | 3 |
|
| BASS | TREBLE |
VFP | 4 | 5 | 6 |
| 7 | 8 | 9 |
ANGLE | TV RETURN |
| 100+ |
| 10 | 0 | +10 |
REPEAT |
|
|
|
| 3D |
|
|
DIMMER | SLEEP ANALOG/DIGITAL CANCEL | ||
|
| INPUT | |
SMART S. SETUP | BASS BOOST |
| A.POSITION |
|
| TONE | |
|
|
| SURROUND |
TEST | EFFECT | DECODE | |
SUBWFR | CENTER | L | SURR R |
NOTES
•When you select DVD MULTI as a source to play, the selected Surround/DSP mode is canceled, and the SURROUND button does not work.
•When using a pair of headphones, the sounds of front left and right channels are output from the headphones.
•The DVD MULTI button does not work for TV Direct.
34
