JVC LVT1112-001A Connecting the power cord, DVD player with 5.1 channel, analogue discrete jacks

Getting started

Analogue connection for DVD MULTI playback (see page 34)

FM 75		AM LOOP			VR	AV IN / OUT	TV
		ANTENNA
COAXIAL	AM EXT CENTER		AUDIO
	L			L	DVD	AV IN	STB
	R			R
DVD		SUB	SURR
IN	FRONT
		WOOFER	(REAR)

							DVD player with 5.1 channel
					CENTER	SURROUND	analogue discrete jacks
				DIGITAL 1			FRONT
				(VR)	SPEAKER	SPEAKERS	SPEAKERS
						RIGHT LEFT RIGHT LEFT
DIGITAL 3	DIGITAL 2		DIGITAL IN				Monaural
(DVD)	(STB)
				CAUTION:
				SPEAKER			audio cord
		SUBWOOFER		IMPEDANCE
			OUT	8 ~ 16

(not supplied)

To center channel audio output

		CENTER	AUDIO
	L		L
	R		R
DVD		SUB	SURR
IN	FRONT
		WOOFER	(REAR)

Stereo audio cord (not supplied)

Monaural audio cord (not supplied)

To surround left channel audio output

To surround right channel audio output

To subwoofer output

To front right channel audio output

To front left channel audio output

Stereo audio cord (not supplied)

NOTE

When using the DVD MULTI playback, use the same DVD player connected to this receiver by a SCART cable. If you connect a different DVD player, the mixed sound from front left and right channels are reproduced.

Connecting the power cord

Before plugging the power cord into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

NOTE

The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not alter, twist or pull the power cord when disconnecting it, or put anything heavy on it, which may cause fire, electric shock, or other accidents.

10