JVC LVT1112-001A manual Operating other manufacturers’ equipment

Operating other manufacturers’ equipment

❏Changing the transmittable signals for operating a

VCR

1Press and hold VCR .

2Press VR.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

4Release VCR .

Now, you can perform the following operations on the VCR.

VCR : Turn on or off the VCR.

After pressing VR (source selecting button), you can perform the following operations on the VCR.

CHANNEL +/–:	Change the channel numbers on the VCR.
1 – 9, 0:	Select the channel numbers on the VCR.
3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press 3.
¡:	Fast-wind a tape.
1:	Rewind a tape.

5Try to operate your VCR by pressing VCR .

When your VCR turns on or off, you have entered the correct code.

If more than one codes are listed for your brand of VCR, try

each one until the correct one is entered.

Manufacturers’ codes for VCR

Manufacturer		Codes
JVC	01*
AKAI	02, 36
BELL+HOWELL	03, 16
BLAUPUNKT	04
CGM	03, 05, 16
DAEWOO	34
DIGITAL	05
FISHER	03, 16
G.E.	06
GRUNDIG	07
HITACHI	08, 09
LOEWE	05, 10, 11
MAGNAVOX	04, 05
MITSUBISHI	12	– 15
NOKIA	16
NORDMENDE	17	– 19, 31
ORION	20
PANASONIC	21
PHILIPS	05, 22
PHONOLA	05
SABA	17	– 19, 23, 31
SAMSUNG	24, 25
SANYO	03, 16
SHARP	26, 27
SIEMENS	07
SONY	28	– 30, 35
TELEFUNKEN	17	– 19, 31, 32
TOSHIBA	33

* Initial setting

❏Changing the transmittable signals for operating a

TV

1Press and hold TV .

2Press TV.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

4Release TV .

Now, you can perform the following operations on the TV.

TV : Turn on or off the TV.

TV VOL +/–:Adjust the volume.

TV/VIDEO: Change the input mode (either TV or VIDEO).

After pressing TV (source selecting button), you can perform the following operations on the TV.

CHANNEL +/–:Change the channel numbers.

1 – 9, 0: Select the channel numbers.

5Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If more than one codes are listed for your brand of TV, try

each one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes
JVC	01*
AKAI	02, 05
BLAUPUNKT	03
DAEWOO	09, 30, 31
FENNER	04, 30, 31
FISHER	05
GRUNDIG	06
HITACHI	07, 08
IRRADIO	02, 05
MAGNAVOX	09
MITSUBISHI	10, 32
MIVER	03
NOKIA	11, 33
NORDMENDE	12, 13, 17, 25 – 27
ORION	14
PANASONIC	15, 16
PHILIPS	09
SABA	12, 13, 17, 25 – 27
SAMSUNG	09, 18, 31
SANYO	05
SCHNEIDER	02, 05
SHARP	19
SONY	20 – 24
TELEFUNKEN	12, 13, 17, 25 – 27
THOMSON	12, 13, 17, 25 – 27, 29
TOSHIBA	28

* Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

37