Speaker settings
Setting the speakers and subwoofer information
Entering the use of the subwoofer, the number of the speakers, and your room size, the center and surround speakers’ delay time is automatically calculated.
•When you change your speakers, register the information about the speakers again.
•You can also set the crossover frequency, the low frequency effect attenuator and the dynamic range compression manually (see page 18).
|
|
|
|
|
|
|
|
|
|
| SOURCE SELECTOR | MASTER VOLUME |
| TV DIRECT | SETTING | ADJUST | SURROUND |
|
|
|
|
| SET / TUNER PRESET | / MULTI JOG |
|
|
|
|
|
|
|
|
|
|
|
|
| PHONES |
STANDBY / ON | STANDBY |
|
|
| DVD MULTI | DVD | STB | VR | TV | FM / AM |
|
|
5Press SET.
“ENTER USE OF SUBWOOFER” scrolls on the display.
6Turn MULTI JOG to select whether or not you have connected a subwoofer.
•As you turn MULTI JOG, the indication changes as follows:
ANALOG L |
| R | |
|
|
|
|
SUBWFR
VOL |
USE * |
| NO |
|
*Initial setting
7Press SET.
“ENTER ROOM SIZE” scrolls on the display.
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press SETTING.
MULTI JOG now works for the setting operation.
2Turn MULTI JOG until “QUICK SETUP” appears on the display.
•As you turn MULTI JOG, the indication changes as follows:
ANALOG L |
| R | |
|
|
|
|
SUBWFR
VOL |
SUBWFR 
FRNT SP 
CNTR SP
SURR SP 
CNTR DL 
SURR DL 
CROSS 
LFE 
D.COMP
DIGITAL IN 
AUTO SR 
MODE
QUICK SETUP |
| (Back to the beginning) |
|
3Press SET.
“ENTER THE NUMBER OF SPEAKERS” scrolls on the display.
•Once you have selected “QUICK SETUP,” previously adjusted speaker setting is cleared.
4Turn MULTI JOG to select the number of the speakers you have connected.
•As you turn MULTI JOG, the indication changes as follows:
ANALOG L |
| R | |
|
|
|
|
SUBWFR
VOL |
5 SPEAKERS* 
3 SPEAKERS
4 SPEAKERS 
5 SPEAKERS*: Select when the front, center and surround speakers are connected.
4 SPEAKERS: Select when the front and surround speakers are connected.
3 SPEAKERS: Select when the front and center speakers are connected.
*Initial setting
Each speaker size is registered appropriately according to the number of the connected speakers. For details, see the list “Speaker size according to the number of speakers” on the right.
8Turn MULTI JOG to select the room size.
• As you turn MULTI JOG, the indication changes as follows:
ANALOG L |
| R | |
|
|
|
|
SUBWFR
VOL |
SMALL* 
MEDIUM
LARGE
* Initial setting
The center and surround speakers’ delay time is registered appropriately according to the room size. For details, see the list “Speaker delay time according to room size” below.
9Press SET to finish the setting.
“SETUP END” appears for a while, then the indication of the previously selected source appears on the display.
NOTES
•The setting you have made is not registered until “SETUP END” appears on the display.
•Performing any operation other than volume and dimmer adjustment cancels Quick Setup process.
•When you want to change the speaker and subwoofer information after Quick Setup, use Manual Setup (see page 17).
Speaker size according to the number of speakers
Number of | Subwoofer | Front | Center | Surround |
speakers |
|
|
|
|
|
|
|
|
|
3 | NO | LRG (large) | SML (small) | NO |
|
|
|
|
|
3 | USE (YES) | SML (small) | SML (small) | NO |
|
|
|
|
|
4 | NO | LRG (large) | NO | SML (small) |
|
|
|
|
|
4 | USE (YES) | SML (small) | NO | SML (small) |
|
|
|
|
|
5 | NO | LRG (large) | SML (small) | SML (small) |
|
|
|
|
|
5 | USE (YES) | SML (small) | SML (small) | SML (small) |
Speaker delay time according to room size
When selecting “SMALL ROOM,” |
| C | R |
• Center speaker delay time | L | ||
|
|
| |
is set to 1 msec. |
|
| 2.4 m |
• Surround speakers delay time |
|
| 2.1 m |
is set to 3 msec. |
|
| 1.8 m |
|
| 1.5 m | |
|
|
| |
| LS |
| RS |
16
