4Finish the procedure.
To restore the stereo effect, repeat the same
procedure and select “Off” on step 3.
To tune in FM stations only with strong
If received signals are weak, you may only hear noises. You can make this unit detect only stations with sufficient signal strength while searching for FM stations.
1Enter the MODE menu (see page 5).
2Select “LO/DX.”
3Select “Local.”
DX
Local 
•DX: To tune in to all receivable stations. 
indicator lights up.
•Local: To tune in to only stations with sufficient signal strength.
indicator lights up.
4Finish the procedure.
Storing stations in memory | ENGLISH |
| |
|
|
You can preset six stations for each band. |
|
FM station automatic presetting—
SSM
1
SOURCE
2Select the FM band (FM1 – FM3)
you want to store into.
BACK
BAND
3Enter the MODE menu (see page 5).
4Select “SSM.”
5
Local FM stations with the strongest signals are searched and stored automatically in the FM band.
To be continued....
11
