Troubleshooting, Symptoms Causes Remedies | JVC LVT1311-003A

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes	Remedies
		• Sound cannot be heard	The volume level is set to the	Adjust it to the optimum
		from the speakers.	minimum level.	level.
			Connections are incorrect.	Check the cords and
				connections.
		• The receiver does not work	The built-in microcomputer	Reset the receiver (see page
General		at all.	may have functioned	2).
General		• “Connect Error” appears on	The control panel is not	Remove the control panel,
			incorrectly due to noise, etc.
		the display.	attached correctly.	wipe the connector, then
				attach it again (see pages 42
				and 49).
		• “Push Reset” appears on	Something is blocking the	Reset the receiver (see page
		the display and the control	control panel movement.	2). If this does not work,
		panel movement is freezed.		check the installation.
		• SSM automatic presetting	Signals are too weak.	Store stations manually.
		does not work.
		• Static noise while listening	The aerial is not connected	Connect the aerial firmly.
		to the radio.	firmly.
FM/AM		• “No Text” appears on the	The station does not support	Check the Network-Tracking
FM/AM		display.	RDS RT or the reception is	Reception (see page 16).
		display.	RDS RT or the reception is	Reception (see page 16).
			weak.
		• “Loading” does not	The receiving signal is	Check the Network-Tracking
		disappear.	temporarily too weak to	Reception (see page 16).
			receive a complete message
			although the service is
			available.
		• CD-R/CD-RW cannot be	CD-R/CD-RW is not	• Insert a finalized CD-R/
		played back.	finalized.	CD-RW.
		• Tracks on the CD-R/		• Finalize the CD-R/CD-RW
		CD-RW cannot be skipped.		with the component which
				you used for recording.
playback		• Disc cannot be ejected.	Disc is locked.	Unlock the disc (see page 23).
playback		• Disc cannot be recognized	The CD player may have	Eject the disc forcibly (see
		• Disc cannot be recognized	The CD player may have	Eject the disc forcibly (see
		(“No Disc,” “Loading	functioned incorrectly.	page 4).
Disc		Error,” or “Eject Error”
Disc		flashes).
		• Disc sound is sometimes	You are driving on rough	Stop playback while driving
		interrupted.	roads.	on rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.

54

Image 54

JVC LVT1311-003A manual Troubleshooting, Symptoms Causes Remedies

Contents

KD-SHX751 How to reset your unit English Contents How to read this manual How to forcibly eject a discFollowing marks are used to indicate How to change the display pattern How to enter the various menusEnter the selected menu Control panel KD-SHX751 Parts identification Main elements and features Remote controller RM-RK300Installing the lithium coin battery CR2025 Getting started To turn off the powerTo drop the volume in a moment ATT Basic operations Finish the procedure Canceling the display DemonstrationSetting the clock Enter the PSM menu see Select Off Listening to the radio When an FM stereo broadcast is hard to receiveRadio operations To tune in to a station manually To restore the stereo effect, repeat the same Enter the Mode menu see Select LO/DX Select LocalEnter the Mode menu see Select SSM Storing stations in memory Enter the Mode menu see Select List Select a preset number Manual presettingWhen using the remote controller Store the station FM RDS operations Select a PTY code⁄ Start searching for your favorite programme PTY codes Select PTYMemory Select a preset numberWhat you can do with RDS Storing your favorite programmes To activate TA Standby Reception Using the Standby Receptions TA Standby ReceptionPTY Standby Reception To activate the PTY Standby Reception Tracking the same programme What is RDS RadiotextUsing the message service Network-Tracking Reception About MP3 and WMA discs Disc/SD card operationsPlaying a disc in the receiver To stop play and eject the disc Playing discs in the CD changer When the current disc is an MP3 discWhen the current disc is an audio CD or a CD Text disc About the CD changer ~ Detach the control panel Playing an SD cardAbout the SD card To eject the SD card, press the SD card again Attach the control panel If an SD Card has been loaded Selecting a disc/folder/track on the list When Disc is selectedOther main functions To select a disc To start playback When Folder is selectedWhen File is selected To select a folder To start playback Selecting the playback modes To cancel the prohibitionProhibiting disc ejection After making sure No Eject? is selected highlighted Mode Plays repeatedly Mode Plays at randomMode Selecting the DSP modes-DSP Sound adjustmentsAdjust the effect level 1 Available DSP modes If you select 4ch, select your car size To make further precise settings for the DSP modesSetting items Select your listening seat position Enter the CCC menu see Select On Making sound naturalTo activate BBE Digital Enter the BBE menu see Select the effect level Adjust the selected setting item To adjust fader and balance -Fad/BalTo adjust subwoofer output- Subwoofer Selection menu-SEL Enter the EQ menu see Select a sound mode To adjust the input level of each source-VolAdjustSelecting preset sound modes Available sound modes Sound Preset equalizing values Mode Storing your own sound modes Select the picture size-Large or Small Basic procedureGraphic displays @ Select the item Select the file type-either Picture or Movie Downloading the ﬁlesDownloading pictures or animations Select a folder Deleting the ﬁles Deleting the stored pictures and animationsDownload the file To delete the stored pictures To delete all the stored pictures To delete all the stored filesTo delete the stored animation Activating the downloaded files Adjust the setting General settings PSMBasic procedure Indications Selectable settings, reference Clock Hr PTyStandby DAB AF*2 Enter the PSM menu see Selecting the dimmer modeSelect a setting Select Dimmer Other main functions To erase the entire titleSelect the source Detaching the control panel Changing the control panel angle External component operations Playing an external component Listening to the DAB tuner ⁄ Select a service either primary or secondary to listen toDAB tuner operations To tune in to an ensemble manually What is DAB system? To search for your favorite serviceWhen surrounding sounds are noisy Select an ensemble primary service Tuning in to a preset DAB serviceStoring DAB services in memory Store the service Announcement Standby Reception When using the remote controllerReception To deactivate the Announcement Standby Reception While receiving an FM RDS station To show the Dynamic Label Segment DLS informationTracing the same programme- Alternative Frequency Reception To deactivate the Alternative Frequency Reception, see Maintenance More about this receiver Playing a disc/SD card Playing a CD-R or CD-RWPlaying an MP3/WMA track Changing the source Sound adjustment Selecting the DSP modes-DSPSetting the basic sound selection menu -SEL ImageLink General settings-PSM Downloading or deleting filesAssigning titles to the sources Troubleshooting Symptoms Causes Remedies MP3/WMA disc/SD card playback PICT-PSM Graphics Sounds CD changer Specifications Audio Amplifier Section Refer to page of How to reset your unit Having Trouble with operation? KD-SHX751 Removing the receiver Retrait de l’appareil Precautions on power supply and speaker connections Precautions sur l’alimentation et la connexion des enceintes Connect the ISO connectors as illustrated Amplificateur Tuner DAB JVCAppareil extérieur