JVC LVT1311-003A manual Other main functions, To erase the entire title, Select the source

Other main functions

Assigning titles to the sources		2 Select a character.
		• For available characters,
You can assign titles to CDs (both in this
		see page 49.
receiver and in the CD changer) and the
external components (LINE-IN and EXT-IN).		3 Move to the next (or previous)
		character position.
Sources	Maximum number of characters
CDs/CD-CH*	Up to 32 characters (up to 30
	discs)
External	Up to 16 characters	4 Repeat steps 1 to 3 until you
components		finish entering the title.

*You cannot assign a title to a CD Text or an

MP3/WMA disc. 4 Finish the procedure.

1 Select the source.

• For a CD in this receiver: Insert a CD.
• For CDs in the CD changer: Select
“CD-CH,” then select a disc number.	• To cancel the title entry without
• For external components: Select
“EXT-IN” or “LINE-IN” (see page 43).	registration, press MENU.

ENGLISH

2Enter the TITLE menu (see page 5).

3Assign a title.

1 Select a character set.

DISP

(A – Z: upper case)

(a – z: lower case)

(Numbers and symbols)

(Accented letters:

upper case)

(Accented letters:

lower case)

To erase the entire title

In step 3 on the left...

DISP

Ex.: When you assign a title to a CD

41