
ENGLISH
To make further precise settings for the DSP modes
These settings you make are valid for all DSP modes except “V.Cancel.”
Setting items:
The number of the built-in speakers:
Select the number of the speakers built in your
•When you have four speakers (4ch) built in your car, select your car size (see step 4 that follows).
Listening seat position:
Select the listening seat position where you want to locate the sound image.
1Repeat steps ~ to ! on page
25 to select DSP mode (except “V.Cancel”).
2Select the number of the
2ch 
4ch 
2ch: Select for the two speaker system.
4ch: Select for the four speaker system.
3
• If you select “2ch,” go to step 5.
4If you select “4ch,” select your car size.
Middle 
Large 
Compact 
Middle: Select when the distance from the rear speakers to the listening seat position is almost equal to that from the front speakers.
Large: Select when the distance from the rear speakers to the listening seat position is longer than that from the front speakers.
Compact: Select when the distance from the rear speakers to the listening seat position is shorter than that from the front speakers.
5Select your listening seat position.
All 
Front
L.Front
R.Front
All: For all front and rear seats.
Front: For the both front seats.
R.Front: For the front right seat.
L.Front: For the front left seat.
6Finish the procedure.
26