When using the remote controller...
To directly select the preset service
Using the Standby Receptions
TA (Road Traffic News) Standby Reception
•Operations are exactly the same as explained on page 15 for FM RDS stations.
•You cannot activate TA Standby Reception separately for the DAB tuner and for FM tuner.
PTY Standby Reception
•Operations are exactly the same as explained on page 15 for FM RDS stations.
•PTY Standby Reception for DAB tuner works only using a dynamic PTY code.
•You can neither store your favorite PTY nor activate PTY Standby Reception separately for the DAB tuner and for the FM tuner.
•You can activate and deactivate PTY Standby Reception when the source is either “FM” or “DAB.”
Announcement Standby Reception
Announcement Standby Reception allows the receiver to switch temporarily to your favorite service (announcement type).
To select your favorite announcement type,
see page 39.
To activate the Announcement Standby | ENGLISH | ||
Reception | |||
| |||
1 | Enter the MODE menu (see page 5). |
| |
2 | Select “Announce.” |
| |
3 | Select an announce type. |
| |
| Selected announcement type |
| |
4Finish the procedure.
ANN indicator appears.
•If the ANN indicator lights up, Announcement Standby Reception is activated.
•If the ANN indicator flashes, Announcement Standby Reception is not yet activated.
To activate, tune in to another service providing these signals. The ANN indicator will stop flashing and remain lit.
To deactivate the Announcement Standby Reception
Select “Off” in step 3 above.
The ANN indicator goes off.
47
