JVC LVT1311-003A manual Playing a disc/SD card, Playing a CD-R or CD-RW, Playing an MP3/WMA track

Playing a disc/SD card

•While playing an audio CD: If a title has been assigned to the audio CD (see page 41), it will be shown on the display.

•While fast-forwarding or reversing an MP3 or WMA track, you can only hear intermittent sounds.

•While playing an SD card, the playback order may differ from the one played back using other SD players.

•This receiver may be unable to play back some SD card due to their characteristics or recording conditions.

•This receiver cannot play back mini SD card and MMC.

•If the inserted SD card does not have the correct files, you cannot select “SD” for the playback source.

Playing a CD-R or CD-RW

•Use only “finalized” CD-Rs or CD-RWs.

•This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

•This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes:

–Discs are dirty or scratched.

–Moisture condensation occurs on the lens inside the receiver.

–The pickup lens inside the receiver is dirty.

–CD-R/CD-RW on which the files are written with “Packet Write” method.

–Improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

•Do not use the following CD-Rs or CD-RWs:

–Discs with stickers, labels, or protective seal stuck to the surface.

–Discs on which labels can be directly printed by an ink jet printer.

Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.

Playing an MP3/WMA track

•This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower).

•This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.

•This receiver can display only one-byte characters. No other characters can be correctly displayed (see page 49).

•This receiver can play back MP3/WMA files meeting the conditions below:

–Bit rate: 8 kbps — 320 kbps

–Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) 48 kHz, 44.1 kHz, 32 kHz (for WMA)

–Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows long file name

•For MP3/WMA discs:

The maximum number of characters for file/ folder names vary among the disc format used (includes 4 extension characters—<.mp3> or <.wma>).

–ISO 9660 Level 1: up to 12 characters

–ISO 9660 Level 2: up to 31 characters

–Romeo*: up to 128 (72) characters

–Joliet*: up to 64 (36) characters

–Windows long file name*: up to 128 (72) characters

*The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.

To be continued....

ENGLISH

51