JVC RX-DV5SL Operating JVC’s Audio/Video Components, Operating Audio Components, CD recorder

: Selects a preset channel number directly. For channel number 5, press 5.

For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

: Tunes into stations.

: Changes the FM reception mode.

English

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the remote control.

Operating Audio Components	7 CD recorder
To operate JVC’s audio components using this remote control	After pressing CDR, you can perform the following operations on a CD
	player and a CD recorder:

•	Aim the remote control directly at the remote sensor on the unit.	TV	TAPE	CDR	FM/AM
•	To operate a source with the remote control, the source must be
	selected using the source selecting buttons on the remote control.		DBS	VCR	DVD
•	Refer also to the manuals supplied with your components.	TV/VIDEO	REW/( TUNING/GROUP 9/FF
		REPEAT	SLEEP	FM MODE	STROBE

7Sound control section (Amplifier)

After pressing CONTROL repeatedly to show “SOUND” on the operation mode display, you can perform the following operations:

TV/DBS CH +

CONTROL EFFECT		CENTER
	1	2	3
ANALOG	TEST	REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF		REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +
	10/0	+10	VFP
		100+	TV RETURN
SURR ON/OFF		: Turns on or off the Surround modes—
			Dolby Digital, DTS Digital Surround, and
			Dolby Pro Logic II.
SURR MODE		: Selects the Surround modes.
TEST		: Turns on or off the test tone output.
CENTER + or –		: Adjusts the center speaker channel output
			level.
REAR•L + or –		: Adjusts the left rear speaker channel
			output level.
REAR•R + or –		: Adjusts the right rear speaker channel

output level.

SUBWOOFER + or – :Adjusts subwoofer channel output level.

EFFECT : Selects the effect level.

Note:

•After adjusting sounds, press the source selecting button to operate your target source by using number buttons; otherwise, number buttons cannot be used for operating your target source.

–TV/DBS CH +

CONTROL EFFECT			CENTER
	1	2	3
ANALOG	TEST		REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF			REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +

10/0 +10 VFP

100 TV RETURN

3: Starts playing.

4: Returns to the beginning of the current (or previous)

track.

¢: Skips to the beginning of the next track.

7: Stops playing.

8: Pauses playing. To release it, press 3. 1 – 10, +10 : Selects a track number directly.

For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Note:

•When you start recording on the CD recorder, use the buttons on the CD recorder itself or on the remote control supplied with it.

7Tuner

You can always perform the following operations:

TV	TAPE	CDR	FM/AM
	DBS	VCR	DVD
TV/VIDEO	REW/( TUNING/GROUP		9/FF
REPEAT	SLEEP	FM MODE STROBE

–TV/DBS CH +

CONTROL EFFECT		CENTER
	1	2	3
ANALOG	TEST	REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF		REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +
	10/0	+10	VFP

FM/AM : Tunes into the last selected FM or AM station.

•Each time you press the button, the band changes between FM and AM alternately.

After pressing FM/AM, you can perform the following operations on a tuner:

1 – 10, +10

TUNING 9 or (

FM MODE

61