JVC RX-DV5SL Creating Realistic Sound Fields, Activating Surround Mode, Selecting Surround Modes

Creating Realistic Sound Fields

English

Activating Surround Mode

When Auto Surround is set to “OFF” or 2-channel source other than Dolby Surround software is played back, activate Surround mode manually.

Make sure that you have set the speakers information correctly (see page 20 or 53).

•If only front speakers are connected, you cannot activate any Surround mode.

Selecting Surround Modes

When 2-channel source is played back with Surround mode activated, you can select another Surround mode.

Available Surround modes will vary depending on the number of the connected speakers and the playback sound.

Make sure that you have set the speaker information correctly (see page 20 or 53).

• You cannot change Surround mode when playing back DVD

AUDIO multichannel track.

On the front panel:

Press SURROUND ON/OFF.

The SURROUND indicator lights up on the display (when Auto Surround is set to “OFF”).

•Each time you press the button, Surround mode is activated and deactivated alternately.

From the remote control:

1Press CONTROL repeatedly so that “SOUND” appears on the operation

mode display.

Number buttons now work for sound adjustments.

SURROUND

ON/OFF MODE

REC MODE

CONTROL

• If rear speakers are not connected, you cannot use DAP modes

and All Channel Stereo.

On the front panel:

Press SURROUND MODE.	ON/OFF MODE
	SURROUND
• Each time you press the button, Surround mode
is changed as illustrated below:	REC MODE
From the remote control:
1 Press CONTROL repeatedly so that	CONTROL
“SOUND” appears on the operation
mode display.

Number buttons now work for sound adjustments.

2 Press SURR ON/OFF.	SURR ON/OFF
	7

The SURROUND indicator lights up on the display (when Auto Surround is set to “OFF”).

•Each time you press the button, Surround mode is activated or deactivated alternately.

2 Press SURR MODE.	SURR MODE
• Each time you press the button, Surround mode is	10/0
changed as illustrated below:

When 5 or 4 (except center speaker) speakers are connected:

DIGITAL AUTO		PRO LOGIC
SURROUND
L	R	VOLUME

SUBWFR

About SURROUND indicators

•When Auto Surround is set to “ON,” the AUTO SURROUND indicator always lights up on the display.

•When you activate Surround mode manually with Auto Surround set to “OFF,” the SURROUND indicator lights up on the display.

DIGITAL AUTO PRO LOGIC AUTO SURROUND

L R SUBWFR

DIGITAL AUTO PRO LOGIC SURROUND

L R SUBWFR

PL		MOVIE	PL		MUSIC
	II			II
LIVE CLUB			DANCE CLUB
HALL			PAVILION
ALL CH ST.			(back to the beginning)

When 3 (except rear speakers) speakers are connected or Dolby Digital including matrix source is played back:

DIGITAL AUTO		PRO LOGIC
SURROUND
L	R	VOLUME

SUBWFR

PL		MOVIE	PL		MUSIC
	II			II

Signal and speaker indicators on the display

The following signal indicators light up —:

L, R	: • When digital input is selected: Light up when
	the signals corresponding to each channel come
	in.

•When analog input is selected: Always light up.

C, LS, RS : Light up when the signals corresponding to each channel come in.

S: Lights up when the monaural rear channel signal or Dolby Surround encoded signal comes in.

LFE	: Lights up when the LFE channel signal comes
	in.

Signal indicators Speaker indicators

The speaker indicators light up as follows:

•The subwoofer speaker indicator ( ) lights up when “SUBWFR” is set to “YES” (see page 20) or “USE” (see page 53).

•The other speaker indicators light up only when the corresponding speaker is activated, and also when required for the current playback.

27