Operating Other Manufacturers’ Equipment, Press and hold

Operating Other Manufacturers’ Equipment

English

7To change the transmittable signals for operating other manufacturers’ VCR

2. Press VCR.	TV TAPE	CDR	FM/AM
	DBS	VCR	DVD

3. Enter the manufacturer’s code	EFFECT	CENTER
	1	2	3
using the number buttons (1–9, 0). TEST		REAR·L
See the right to find the code.	4	5	6
See the right to find the code.	SURR ON/OFF	REAR·R
	SURR ON/OFF	REAR·R
	7	8	9
	SURR MODE – SUBWOOFER +
	10/0	+10
		100+

STANDBY/ON VCR : Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a VCR:

1 – 9, 0 : Selects the TV channels on a VCR. For channel number 5, press 5.

For channel number 10, press 1, then 0. For channel number 23, press 2, then 3.

TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

3: Starts playing.

REW : Rewinds a tape.

FF: Fast-winds a tape.

7 : Stops operations.

8 : Pauses playing. To release it, press 3.

Note:

•Refer also to the manual supplied for your VCR.

*“00” is the initial JVC code.

Note:

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.