JVC RX-DV5SL Operating Video Components, English, 7VCR, Standby/On Vcr, Rewinds a tape, Tv/Video

Operating Video Components

To operate JVC’s video components using this remote control

•You need to connect JVC’s video components through the AV COMPU LINK-III jacks (see page 59) in addition to the audio/video connections (see pages 7 to 10).

•Some JVC’s VCRs can accept two types of the control signals— remote codes “A” and “B.” Before using this remote control, make sure that the remote control code of the connected VCR is set to code “A.”

•To operate the video component(s) using the remote control, aim the remote control directly at the remote sensor on each component, not on this unit.

7TV

You can always perform the following operations:

STANDBY/ON

DBS VCR TV AUDIO

TV TAPE CDR FM/AM

DBS VCR DVD

TV/VIDEO REW/( TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

–TV/DBS CH +

CONTROL EFFECT			CENTER
	1	2	3
ANALOG	TEST		REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF			REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +

10/0 +10 VFP

7VCR

You can always perform the following operations:

STANDBY/ON

DBS VCR TV AUDIO

TV TAPE CDR FM/AM

DBS VCR DVD

TV/VIDEO REW/( TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

–TV/DBS CH +

CONTROL EFFECT		CENTER
	1	2	3
ANALOG	TEST	REAR·L
/DIGITAL
INPUT	4	5	6
AUDIO SURR ON/OFF		REAR·R
	7	8	9
SUBTITLE SURR MODE		– SUBWOOFER +
	10/0	+10	VFP
		100+	TV RETURN
STANDBY/ON VCR			: Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a VCR:

1 – 9, 0 : Selects the TV channels on a VCR. For channel number 5, press 5.

For channel number 10, press 1, then 0. For channel number 23, press 2, then 3.

3: Starts playing.

REW : Rewinds a tape.

FF: Fast-winds a tape.

7: Stops operations.

8: Pauses playing. To release it, press 3.

English

ANGLE

DIMMER

100+ TV RETURN

PROGRESSIVE

+

PAGE

ZOOM MUTING

–

STANDBY/ON TV VOL + or –

TV/VIDEO

+	+
TV VOL	VOLUME
–	–
TV	: Turns on or off the TV.
	: Adjusts the volume.
	: Sets the input mode (either TV or
	VIDEO).

After pressing TV, you can perform the following operations on a TV:

TV/DBS CH + or –	: Changes the channels.
1 – 9, 0, 100+	: Selects the channels.
	For channel number 5, press 5.
	For channel number 10, press 1, then 0.
	For channel number 23, press 2, then 3.
	For channel number 135, press 100+, 3,
	then 5.
TV RETURN	: Alternates between the previously
	selected channel and the current
	channel.

62