English
Tuner Operations
Tuning into Stations Manually | Using Preset Tuning |
On the front panel:
1 Press FM/AM to select the band. | FM/AM | |
The last received station of the selected band is |
|
|
E | ||
|
| |
tuned in.
The CONTROL buttons now work for tuner operations.
•Each time you press the button, the band alternates between FM and AM.
ANALOG |
|
|
|
L | R | SPK. | AUTO MUTING |
| VOLUME | ||
|
|
|
MHz
Ex. : When selecting the FM band
2 Press CONTROL ∞ (or 5)
repeatedly until “< TUNING >” | CONTROL | |||
|
|
|
| |
appears on the display. |
|
| ||
ANALOG |
|
|
|
|
L | R | SPK. | AUTO | MUTING |
|
| VOLUME | ||
|
|
|
| |
3 While “< TUNING >” still remains |
| |||
on the display, press repeatedly or | CONTROL | |||
| ||||
hold CONTROL 3 (or 2) until you | ||||
find the frequency you want. |
| |||
ANALOG |
|
|
|
|
L | R | SPK. | TUNED STEREO AUTO | MUTING |
|
| VOLUME | ||
|
|
|
| |
|
|
|
| MHz |
•Pressing (or holding) CONTROL 3 increases the frequencies.
•Pressing (or holding) CONTROL 2 decreases the frequencies.
From the remote control:
1Press FM/AM.
“TUNER” appears on the
operation mode display.
2Press repeatedly or hold TUNING 9 or ( until you find the frequency you want.
•Pressing (or holding) TUNING 9 increases the frequencies.
•Pressing (or holding) TUNING ( decreases the frequencies.
Notes:
•When you hold and release CONTROL 3 (or TUNING 9 on the remote control) or CONTROL 2 (or TUNING ( on the remote control), the frequency keeps changing until a certain station is tuned in.
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
•When an FM stereo program is received, the STEREO indicator also lights up.
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.
7To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2 again.
On the front panel ONLY:
1Tune into the station you want to preset (see “Tuning into Stations Manually”).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 18.
ANALOG |
|
|
|
L | R | SPK. | TUNED STEREO AUTO MUTING |
| VOLUME | ||
|
|
|
MHz
Ex. : When selecting the FM band
2 Press MEMORY. | MEMORY | ||
The channel number position starts flashing on the | |||
display for about 5 seconds. |
| ||
ANALOG |
|
|
|
L | R | SPK. | TUNED STEREO AUTO MUTING |
| VOLUME | ||
|
|
| |
|
|
| MHz |
3 Press CONTROL 3 (or 2) to select | |||
|
|
| CONTROL |
a channel number while the channel | |||
number position is flashing. | |||
ANALOG |
|
|
|
L | R | SPK. | TUNED STEREO AUTO MUTING |
| VOLUME | ||
|
|
| |
|
|
| MHz |
|
|
| MEMORY |
4 Press MEMORY again while the selected | |||
channel number is flashing on the | |||
display.
The station is assigned to the selected channel number.
•The selected channel number stops flashing and then the frequency starts flashing.
ANALOG
L | R | SPK. | TUNED STEREO AUTO MUTING |
| VOLUME | ||
|
|
|
MHz
5Press CONTROL 3 (or 2) to select another frequency you want to store while the frequency is flashing on the display.
6Repeat steps 2 to 5 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the previously stored one.
17
