JVC RX-DV5SL manual For DVD Player

7For DVD Player

PROBLEM

No picture is displayed on the TV.

No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts.

No sound is heard and “NO AUDIO” appears on the display.

A disc cannot be played.

A disc cannot be played and “0:00” appears on the display.

Video and audio are distorted.

“MULTI CH” or “L/R ONLY” appears on the display.

The picture does not fit the TV screen

properly.

One-touch DVD playback does not work though you have connected AV COMPU LINK cord correctly.

No subtitle appears on the TV screen though you have selected as your initial subtitle language.

Audio language is different from the one you have selected as your initial audio language.

POSSIBLE CAUSE

The video cord is not connected correctly.

TV input selection is incorrect.

The disc is not playable.

The scanning mode is set to

“PROGRESSIVE” though the unit is connected to the TV which does not support the progressive video input, such as a conventional TV.

The loaded disc may be illegally copied.

The unit’s and disc’s Region Code numbers are incompatible.

Parental Lock is in use.

The disc is loaded with its label and data sides inverted.

The unplayable disc is loaded.

The disc is scratched or dirty.

A VCR is connected between the unit and the TV.

With some discs, a picture may be blurred when setting “PROGRESSIVE MODE” to “FILM” or “AUTO.”

The current track prohibits you from playing back with stereo sound.

“MONITOR TYPE” is not set correctly.

The TV is not set correctly.

The video output mode setting is incorrect.

SOLUTION

Connect the cord correctly (see pages 8 and 9).

Select the correct input on the TV.

Replace the disc (see page 29).

Change the scanning mode to “INTERLACE” (see page 14).

Consult with the disc vendor.

Replace the disc (see page 29).

Enter your password to change the parental level (see pages 55 and 56).

Insert the disc correctly (see page 15).

Replace the disc (see page 29).

Replace or clean the disc (see page 66).

Connect the unit and TV directly.

Set “PROGRESSIVE MODE” to “VIDEO” (see page 51).

Activate Surround mode (see page 43) or listen to another track.

Set the monitor type correctly (see page 51).

Set the TV correctly.

Set the video output mode correctly according to the video connection between your TV and the unit (see page 22).

Some discs are programmed to always display no subtitle initially. If this happens, press SUBTITLE on the remote control after starting play (see page 35).

Some discs are programmed to always use the original language initially. If this happens, press AUDIO on the remote control after starting play (see page 35).

English

68