JVC RX-DV5SL manual English, Auto surround—“AUTOSR”, Video output mode—“VOUT”

7 Auto surround—“AUTO SR”			7 Video output mode—“VOUT”
	DIGITAL AUTO			DIGITAL AUTO
	AUTO SURROUND	SPK.			SPK.
	L R			L R
		VOLUME			VOLUME

English

Surround mode is automatically activated when the digital multichannel source such as Dolby Digital or DTS Digital Surround software or 2-channel matrix source such as Dolby Surround is played back.

You can enjoy Surround mode simply by selecting the source (with digital input selected for that source)—Auto Surround.

Select one of the following settings:

ON	: The AUTO SURROUND indicator always lights up
	on the display.

•If multichannel signals come in, an appropriate Surround mode will be turned on.

•If Dolby Digital 2-channel or DTS 2-channel including surround signals come in, “PL II MOVIE” will be selected.

•If Dolby Digital 2-channel or DTS 2-channel signals without surround signals come in, “STEREO” will be selected.

•If the other signals come in, nothing will change.

OFF : Select this to deactivate Auto Surround.

Notes:

•“ON” is the initial setting. If you have already changed the setting, “OFF” will be shown.

•This function does not take effect in the following cases:

–While playing an analog source.

–While selecting “DGTL D.D.” or “DGTL DTS” as the fixed digital input mode (see page 13).

•If you press SURROUND ON/OFF (SURR ON/OFF on the remote control) with Auto Surround activated, Auto Surround will be canceled temporarily for the currently selected source. Auto Surround setting will be restored in the following cases:

–When you turn off and on the unit,

–When you change the source,

–When you change the analog/digital input, and

–When you reset “AUTO SR” to “ON” again.

After connecting your TV to the unit, register the type of the connected output terminal—VIDEO, S-VIDEO, or

DVD COMPONENT VIDEO OUT.

Without setting this, AV COMPU LINK does not work appropriately when DVD is selected as the source (see

“AV COMPU LINK Remote Control System” on pages 59 and 60).

Set the output terminal appropriately.

VIDEO : Select this when you connect your TV to VIDEO jack by using a composite video cord.

S: Select this when you connect your TV to S-VIDEO jack by using an S-video cord.

COMPNT : Select this when you connect your TV to DVD COMPONENT VIDEO OUT jacks by using component video cord.

Note:

•“VIDEO” is the initial setting. If you have already changed the setting, another setting will be shown.

22